Window rubber seals, gaskets, covers, etc

[KYAvion]

I’m assuming these sizes would fit my 1983 34’?

As far as the seals and gaskets fitting, I don’t see why they wouldn’t. @Salty - is your trailer an 80’s model 34’? Of course the total length needed is likely different since you have a 34’, and I imagine the window sizes may be different.

[Salty]

concur

[KYAvion]

@Salty I saw in another post you mentioned the missing part from the list referenced in this thread is 009-482. This is the piece that goes above each window, correct?

Since you’ve redone your windows, do you know what part number Becky was referring to when she said...

“I omitted the fixed glass rubber part on my 1988 32S & just filled the gaps with black silicone per Chuck Cayo.”

[Salty]

@Salty I saw in another post you mentioned the missing part from the list referenced in this thread is 009-482. This is the piece that goes above each window, correct?

Correct

Since you’ve redone your windows, do you know what part number Becky was referring to when she said...

“I omitted the fixed glass rubber part on my 1988 32S & just filled the gaps with black silicone per Chuck Cayo.”

I am unsure what she is referring to.

That seal can be found here:http://www.parkin-acc.com/page53.html
or here:https://www.interstatervmetalandsupply. ... ndows2.htm

[KYAvion]

Thanks. When installing these seals, gaskets, covers, etc., did you have to apply any adhesive to hold them in place?

[KYAvion]

Additional resources for gaskets...

https://www.vintagetrailersupply.com/He ... ts-195.htm

https://www.vintagetrailergaskets.com/v ... -seal.html

[Salty]

Additional resources for gaskets...

https://www.vintagetrailersupply.com/He ... ts-195.htm

https://www.vintagetrailergaskets.com/v ... -seal.html

Just to be clear, those are the seals on the very bottom of the windows that open, on the window frame. 1 seal per window assembly (not per pane)

[KYAvion]

Have you got a pic to illustrate?

[Razorback]

Additional resources for gaskets...

https://www.vintagetrailersupply.com/He ... ts-195.htm

https://www.vintagetrailergaskets.com/v ... -seal.html

Just to be clear, those are the seals on the very bottom of the windows that open, on the window frame. 1 seal per window assembly (not per pane)

Ah, yes..... that’s the piece that is on the lower lip of the window frame that seals behind the lower pane frame.... I will need to get some of that, too.

[KYAvion]

Tutorial on installing window glaze bead.

https://thepewterpalace.com/2018/09/04/ ... laze-bead/