Plumbing schematic
Plumbing schematic
When I purchased this trailer, the only means of having water was with pressurized city water. It was purchased with another tank but all else was removed ( ie pump, alternate piping, 3 way valve, etc) i would like to restore these capabilities but I'm not quite sure of which pump, which 3 way valve and piping. My question; is there a schematic available showing all info needed to restore my system to have alternative water source? the schematic would include a piping diagram, a pump, and a 3 way 12vdc valve to switch between city water and reserve water.
- Attachments
-
- image.png (751 Bytes) Viewed 9514 times
Re: Plumbing schematic
Without knowing more specifics about your trailer, it’d be tough to provide a schematic. However, if you’ve got a fresh water tank it wouldn’t be hard to make it work with a water pump. The water pump pulls water from the tank and pumps the water into a cold plumbing line.
As far as a 12v valve, usually people just install a check valve or shut off at the city water connection, so the loop is closed when using the water pump.
I’d also recommend installing a check valve or shut off right after the output of the water pump to prevent water from pushing into the pump when connected to city water.
As far as a 12v valve, usually people just install a check valve or shut off at the city water connection, so the loop is closed when using the water pump.
I’d also recommend installing a check valve or shut off right after the output of the water pump to prevent water from pushing into the pump when connected to city water.
KYAvion
1984 Avion 30R
1984 Avion 30R