1969 Avion C-11 Truck Camper = Full Restoration

[motohead761]

This is a Total Restoration .
Tore down to just the Aluminum Shell.
Interior walls were stripped and painted with Automotive Enamel.
Floor - Wing Walls - Front wall - Over Cab Bed Rebuilt with Marine grade Plywood then sealed with Urethane sealer.
Plumbing was removed and new plumbing includes 15 gallon grey water tank and 5 gallon black water tank.
New 20 gallon fresh water tank.
Outside shower
Pex Plumbing Thoughout
All Stainless Steel screws used
LED lights through out
Post Jack stabilization bars
Both dump valves are now outside the fiberglass lower cap.
Old water heater was replaced with an LP on-demand heater.
5,000 BTU A/C unit on slides now occupies the water heater box.
Winneguard TV Antenna
14x14 upper hatches
New Electric/LP refrigerator
New Progressive Dynamics 30 Amp converter
New power cord and breaker box
Also includes Step Hand Rail- 4 Torqlift Spring loaded Tiedowns - Extension Hitch for Towing
Stored Inside
Can help with Delivery
Yes it does require a 3/4 or 1 ton Truck
I have all build receipts and dozens of build photos. 18,000 Dollars

IMG_0462.JPG/attachment]

[Razorback]

Beautiful..... just beautiful!

[uscgbruce]

I’m getting ready to replace the wood in the wings and the floor.

Any hints or tips, specifically: what order?
Wing horizontals
Wings verticals
Then the floor

Thanks
Bruce

[KYAvion]

Wish I could help you out, but I’m not familiar with the truck campers. It might be worth reaching out to Chuck Cayo at Cayo Repair in Michigan.