Flexible propane line between regulator and hard pipe

Post by **KYAvion** » Fri May 29, 2020 9:48 pm

A critter appears to have chewed on the flexible propane line between the regulator and the hard pipe. Has anyone replaced this line, and if so do you have a link to your replacement?

Post by **KYAvion** » Fri May 29, 2020 9:57 pm

Anyone know if the size of the fittings on this hose is correct?

https://www.etrailer.com/Propane/MB-Stu ... BYQAvD_BwE

Salty · Post by **Salty** » Mon Jun 01, 2020 7:20 pm

When I replaced mine, I bought a 3/8" line with 1/2" female connectors on both ends, Took the old pipe, hose and regulator with me to the hardware store, had them cut a pipe to length and thread the ends. Then fit it all together right there. I couldn't reuse the old pipe. We couldn't get the hose off the old pipe.
I needed two fittings to make it all fit up.

silverloaf · Post by **silverloaf** » Tue Jun 02, 2020 5:23 pm

KYAvion wrote: ↑Fri May 29, 2020 9:48 pm A critter appears to have chewed on the flexible propane line between the regulator and the hard pipe. Has anyone replaced this line, and if so do you have a link to your replacement?

I would use something like this if I did it again. This one is 3/8". Perhaps they make them in 1/2"

https://www.amazon.com/STAINLESS-BRAIDE ... 82&sr=8-26

Post by **KYAvion** » Tue Jun 02, 2020 10:18 pm

Thank you all for the suggestions.

As far as the stainless braided hose, I suppose a 3/8 to 1/2 half adapter could be used.

AVION Travel Trailers