Bottom maintenance
Posted: Sun Mar 29, 2020 10:43 pm
Last weekend I jacked up the trainer and ripped the belly pans off
here they are in all their gory , I mean glory
So yesterday and today I painted the wood underneath and threw on some 3/4" insulation
Looks Like I have another terminal strip in my near future. 
Nicely installed if I do say so myself.
Tore the wheels off the drivers side today
Something to note.
Avion created the belly pans from 36x72" sheet aluminum. They then proceeded, at least from aft of the axles forward, to create a single belly pan by interlocking the sections together. Should you ever need to remove a particular section you can pry them apart at the seams and then remove sheet metal screws.
I won't be able to replace them this way sadly. I don't have the tooling. Thinking about riveting sections together and then Eternabonding the seams.
We'll see. I'm in Isolation this week.
here they are in all their gory , I mean glory
Tore the wheels off the drivers side today
Avion created the belly pans from 36x72" sheet aluminum. They then proceeded, at least from aft of the axles forward, to create a single belly pan by interlocking the sections together. Should you ever need to remove a particular section you can pry them apart at the seams and then remove sheet metal screws.
I won't be able to replace them this way sadly. I don't have the tooling. Thinking about riveting sections together and then Eternabonding the seams.
We'll see. I'm in Isolation this week.