Bathroom Exhaust fan

Shell/Exterior Maintenance, Windows, Gaskets, Awnings, Vent Lids/Covers, Rockguards
Post Reply
Kep
Posts: 79
Joined: Wed Jun 12, 2019 2:47 pm

Bathroom Exhaust fan

Post by Kep »

Well I tried to see if I could make the fan work but when I touched the fan it crumbled.

Any sources for these. I think Airstream used them too.

I can't tell if this is it.
https://www.amazon.com/Ventline-VP-543- ... T2029T7YGB

https://woodlandtravelcenterstore.com/p ... 2dec&_ss=r

https://www.amazon.com/Ventline-Dex-VP5 ... 574&sr=8-2
1975 28' LeGrande Twins, rear bath, front dinette.
User avatar
KYAvion
Site Admin
Posts: 1671
Joined: Sun Sep 18, 2016 1:04 am

Re: Bathroom Exhaust fan

Post by KYAvion »

If the opening is sized right, any of those should work. My 84 doesn’t have a 6” fan. Instead it’s got a larger square one. I haven’t measured, but it’s probably 14 x 14. If you don’t want to stick with the 6”, depending on the location you may be able to put in a MaxAir with cover.
KYAvion
1984 Avion 30R
Kep
Posts: 79
Joined: Wed Jun 12, 2019 2:47 pm

Re: Bathroom Exhaust fan

Post by Kep »

I put in two fantastic fans already. So I'm more looking for a replacement. I found one new on eBay for $50 and free shipping. I just hope it is a drop in replacement. My flange is metal and sealed very well.
1975 28' LeGrande Twins, rear bath, front dinette.
Kep
Posts: 79
Joined: Wed Jun 12, 2019 2:47 pm

Re: Bathroom Exhaust fan

Post by Kep »

Well I got the Fan and it seems I will need to use the entire fan as the fan assembly is riveted together.
I will try to use the metal cover from mine as the cover on the new one is a smoke acrylic plastic that will rot in the AZ sun. I'm going to try mounting it this weekend.

Attn: I did notice that there is a drain hole that will need to be orientated so as to face the down slope to permit proper draining. Here is the one I selected.
https://www.ebay.com/itm/vanair-roof-ve ... 2749.l2649
1975 28' LeGrande Twins, rear bath, front dinette.
Post Reply