Floor replacement

Mgreene57 · Post by **Mgreene57** » Sun Feb 10, 2019 6:10 pm

In the pix with the original floor you will see a space between the sub floor and the channel. This was the way the floor was when I started. It had the original tile stuck on the floor. Then you will see photos of my effort to put the correct thickness of flooring. Ideas on how to get the shell up besides leverage?

silverloaf · Post by **silverloaf** » Sun Feb 10, 2019 7:06 pm

Mgreene57 wrote: ↑Sun Feb 10, 2019 6:10 pm In the pix with the original floor you will see a space between the sub floor and the channel. This was the way the floor was when I started. It had the original tile stuck on the floor. Then you will see photos of my effort to put the correct thickness of flooring. Ideas on how to get the shell up besides leverage?216C1B13-904F-4190-B888-4BFF4F0A9939.jpegF40457BC-5BAA-436B-981B-A1F68668CC70.jpeg

Can you take a picture of the overall floor that shows where you are working?

What is the year and model of your trailer?

Are you removing the belly pan?

Mgreene57 · Post by **Mgreene57** » Sun Feb 10, 2019 8:12 pm

1958 23’ 1 owner.

silverloaf · Post by **silverloaf** » Sun Feb 10, 2019 10:09 pm

Here's a website that might interest you:
https://ynotcamperrestoration.com/proj06-b.html

Johnatron · Post by **Johnatron** » Thu May 09, 2019 5:18 pm

Did you figure it out? How about removing the belly pan, using a floor jack to raise up the shell, then use stanchions or jack stands to keep it raised while you install the new floor?

AVION Travel Trailers