12 volt kill switch
12 volt kill switch
So I was running off the batteries and had some lights on, two fantastic fans running, and the bathroom fan on. I start the water for a shower, and the 12v kill switch trips. I try it again, but each time the water pump kicks on the breaker trips. Once I turned out some lights (kitchen, a couple overhead lights, and the valence lights), all worked fine.
I suspect the breaker is probably bad, so I'll replace it and see out it goes. Unfortunately my Avion isn't home with me now and I didn't check the breaker type before leaving, so can anyone tell me the brand and size of the breaker?
I suspect the breaker is probably bad, so I'll replace it and see out it goes. Unfortunately my Avion isn't home with me now and I didn't check the breaker type before leaving, so can anyone tell me the brand and size of the breaker?
KYAvion
1984 Avion 30R
1984 Avion 30R
Re: 12 volt kill switch
Picture coming soon of the kill switch in our 1987 34W...... But ours was made by Carlingswitch, Inc., 30A, Max Volts=65VDC, 277VAC, Delay=34, Trip amp = 40.5, .
Razorback (Paul)
1987 Avion 34W
1995 Ford F-250 7.3L PowerStroke
I'm a "whosoever"... are you???
1987 Avion 34W
1995 Ford F-250 7.3L PowerStroke
I'm a "whosoever"... are you???
Re: 12 volt kill switch
Here is the picture.
Also sent the picture and an inquiry to Carling to see if they still carry it (or can point me to a distributor).
Also sent the picture and an inquiry to Carling to see if they still carry it (or can point me to a distributor).
Razorback (Paul)
1987 Avion 34W
1995 Ford F-250 7.3L PowerStroke
I'm a "whosoever"... are you???
1987 Avion 34W
1995 Ford F-250 7.3L PowerStroke
I'm a "whosoever"... are you???
Re: 12 volt kill switch
BTW, why do you think it is that this breaker doesn't trip when I'm running a similar load and plugged into 110v. Of course the converter is converting 110 to 12v, but isn't that 12v load still running through that 30 DC breaker?
KYAvion
1984 Avion 30R
1984 Avion 30R
Re: 12 volt kill switch
Not sure how to answer your question.
As you can see in the picture, there is a black area at the top edge of the label. There are numbers in that area that I cannot make out. Can anyone here possibly look at theirs and see what their label shows?
As you can see in the picture, there is a black area at the top edge of the label. There are numbers in that area that I cannot make out. Can anyone here possibly look at theirs and see what their label shows?
Razorback (Paul)
1987 Avion 34W
1995 Ford F-250 7.3L PowerStroke
I'm a "whosoever"... are you???
1987 Avion 34W
1995 Ford F-250 7.3L PowerStroke
I'm a "whosoever"... are you???
Re: 12 volt kill switch
Received this reply from Carling.....
"Hi Paul,
I found a distributor Spemco Specialties that has the breaker in stock with a white handle. Part number AA1-B0-34-630-3B1-C.
Here is the link where you can order it: http://spemco.com/aa1-b0-34-630-3b1-c-c ... r-30-amps/"
Do a web search on the part number.... you might find it cheaper.
"Hi Paul,
I found a distributor Spemco Specialties that has the breaker in stock with a white handle. Part number AA1-B0-34-630-3B1-C.
Here is the link where you can order it: http://spemco.com/aa1-b0-34-630-3b1-c-c ... r-30-amps/"
Do a web search on the part number.... you might find it cheaper.
Razorback (Paul)
1987 Avion 34W
1995 Ford F-250 7.3L PowerStroke
I'm a "whosoever"... are you???
1987 Avion 34W
1995 Ford F-250 7.3L PowerStroke
I'm a "whosoever"... are you???